Product name | Specifications | Features | Uses |
Common PPS | 2.22dtex x 51mm | cylindrical fiber, balanced indexes and performance. | first choice of Common filter material |
Trefoil PPS | 2.22dtex x 51mm | three-lobed fiber, compared with circular fiber, it can increases the specific surface area of fiber, thereby can increase the absorption capacity to dust particles, so it can concentrate dust mostly to the surface of filter and is very difficult to penetrate into the interior of material, to avoid filter clogging pores, thus reduce the resistance of equipment operation. The dust collection efficiency of Trilobal fiber filter is one level higher than circular fiber;compared with circular fiber, the profiled fiber PPS filter has higher elongation and lower tensile strength. | |
Superfine denier PPS | 1.1dtex x 51mm | The filter media made of Superfine denier PPS can capture smaller dust particles because the gap between fiber is very small.Superfine denier PPS can transfer traditional single-Denier fiber filter into a gradient fiber filter including superfine, fine denier and coarse denier fiber, which can improve the precision and efficiency of filtration greatly | |
High strength PPS | 1.7dtex x 51mm | The base fabric of filter is used to support the skeleton and backbone; in order to ensure the strength and life of filter, we must use PPS fiber owning the highest strength as much as possible .Therefore 1,67 dtex --- 1, 89dtex of high strength PPS fiber can reach single strength of fiber> 4,6 cN; at the same time, because the fine denier fiber the number of yarns per cross section, so it can enhance the strength of yarn. |
短纤直纺工艺流程(前纺)
短纤间纺工艺流程(前纺)
短纤前纺工序现场实景图
短纤后紡工艺流程
短纤后纺现场图
Address: Dangshan Industrial Park, Xiaoshan District, Hangzhou, Zhejiang Province
Sales Department: +86-571-57163008
E-mail: dh@donghuafiber.com
Copyright(C)2022,Hangzhou Guanchen Industrial Co., Ltd. All Rights Reserved. Supported by ChinaTexNet Toocle 31fabu Copyright Notice